Description
Product Description
Specification:
Certification: NONE
Origin: Mainland China
Type: Cable Adapter
Model Number: SSD Memory Card
SD to 2.5 inch IDE:
Main features: SD card with small size, large capacity, shock and moisture resistant, high temperature resistant, stable performance, permanent and effective data preservation, no noise, no seek error characteristics. It is the popular mainstream product memory card nowadays. This adapter card enables the conversion of SD cards to SSDs with a 2.5" IDE 44PIN interface.
Application areas: industrial computer motherboards, industrial control machines, tablet PCs, instrumentation, soft routing, POS machines, hard disk recorders.
Main performance:
1.Taiwan FC1307A solution.
2. Compatible with DOS, WINCE, WIN98/XP/VISTA/NT, WIN7/8/10 and LINUX operating systems.
3. Equivalent to industrial use flexible plug-in SSD, use SD as a mobile hard disk to achieve flexible movement of data storage.
4. The hard disk can be used as a system boot disk or a data disk after transferring.
5. SD supports high-speed cards.
6. SD has so far been measured to support up to 128GB, with no upper limit in theory. To use high capacity SD, please try a sample before purchase.
7. IDE is compatible with ATA33/66/100.
8. Supports edge cutouts. SD mobile storage can be achieved by slotting in the user’s device chassis right in front of the SD card slot opening.
9. With the BIOS and operating system together can support SATA, SD hot-swapping, plug and play, without any driver can be used. SD card to do hot-swapping should pay attention to the BIOS, operating system and applications should be well coordinated. Do not hot-swap when reading or writing data to avoid data loss. Cold swapping is generally recommended for mobile data storage.
10. Size: 52 x 41mm/2.0 x 1.6inch
Caution:
1. Before using this product, please insert the SD card into the corresponding SD socket, then connect the SATA power and SATA data cable to the SATA host device. After power on, the LED light flashes, indicating that the SD card data is read properly.
2. After initial use and SD card configuration change, you need to initialize the SD card and format it. Once the formatting is complete, you can perform any data operations on the SD card
SD to 3.5" IDE:
SD-IDE conversion interface board instructions for use: POWER power supply holder available hard disk power supply, this card only need to use 5V power supply, normal working voltage is 5V±0.25V. working current is less than 200mA.
For IDE socket, please use 80 PIN hard disk connection cable. The card supports PIO, Multi-word DMA and Ultra DMA Host data transfer modes;
SD socket supports SD cards up to 128GB.
Once the power supply and IDE cable are connected and the SD socket is inserted into the SD card, the converter board is equivalent to an electronic hard disk and no driver installation is required. After installation of the operating system, the SD memory card can be used to boot the operating system (e.g. Windows 98).
High data transfer rate, roughly the same speed as the system hard disk
(ATA/133, U-DMA mode3).
Size: 80 x 68mm/3.1 x 2.7inch
Colour: Blackboard New chip 1309
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 x SSD Memory Card
Reviews
There are no reviews yet.