Description
Product Description
3D Printer Parts Extruder Clone Dual Drive Upgrade Bowden Extruder 1.75mm Filament for Creality Ender 3 Ender 5 Pro CR10S
Feature:
1. Exquisite material selection and exquisite design. Transparent materials can better observe the normal operation of the equipment., High hardness, personalized design, long service life
2. Easy to adjust tension. An opening knob is designed on the side of the extruder to fix one of the double drive gears. The knob is closed with a spring tensioned thumbscrew. The finger screw can provide precise tension for the driving gear to fix the filament correctly, release the strain and simply load or unload the filament. All you need to do is pull it away from the extruder so that the spring is compressed enough to release the pressure on the material, allowing you to easily feed it directly into the hot end.
3. Double gear. Traditional extruders usually have only one driving gear and one guide bearing, which leads to insufficient clamping force with consumables and poor printing quality. Two driving wheels grasp the filament from each side to provide solid and reliable feeding for the hot end. From common materials such as PLA and ABS to flexible filaments such as TPU or TPE, the twin drive gears of the extruder can provide consistent filament flow in direct drive or Bowden configurations.
4. Uses a 3:1 internal transmission ratio and precision CNC machined hardened steel drive gears to provide you with a compact power unit suitable for all your applications. Whether you need high-resolution printing with a small nozzle or high flow printing with a large nozzle, the optimized transmission ratio, combined with our industry-leading drive gear, can provide unparalleled driving force and flash fast retraction in a lightweight and compact package.
5. Suitable for most 3D printers, such as for creality Ender 3 Pro / Ender 5 Pro / cr10s pro, for Anycubic Mega s,for Tevo Tornado Wanhao D9, for anet A8 E10 and prusa I3 DIY, and other 3D printers
Specification:
Product material: engineering plastics
Product color: Black, White (optional)
Supported filament diameter: 1.75mm
Product weight: 147g
Product size: 73.5x58x34.5mm
Product application: 3D printer accessories
Installation method:
1. Remove the original extruder.
2. Remove the old gear from the motor.
3. Replace the new gear and lock the screw. Pay attention to the direction of the gear.
4. Carefully put the motor back.
5. Put the extruder on it.
6. Tighten the three new bolts provided by us.
Note:
When printing the soft wire, do not adjust the tension of the hand screw too tight, otherwise the long wire will be wound on the wheel. Manually adjust to fit your 3D printer.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 x Extruder
Reviews
There are no reviews yet.